Display Powerbook G3 Wallstreet take-apart instructions You'll need a torx-8 and a small regular screwdriver as well as a very sharp knife. I'm also selling these parts, see www.apfelklinik.de for details. If you find these instructions helpful, please consider a small donation:

01. I took a 14.1" display as an example for my instructions. 02. Remove the screw covers like this (use a glue stick to put them back on). 03. Pull the "rubber bumpers" out by moving them to and fro. 04. Now you can access all 6 screws. 3-6 are small and silver. 05. Push the clutch back and push your fingers into the slit. 06. Work your way around and then remove the tape. 07. Now remove both cables that lead into the inverter board. 08. Pick up the data cable like this and pull it downward. 09. Now remove all 4 screws on the right ... 10. ... and remove the whole cable/hinge lot. 11. Seperate them very, very carefully, then unwind the cable. 12. Now remove the 4 screws on the left ... 13. ... and lift the LCD straight up. 14. CAUTION! The cable is glued to the case. Pull it gently away. 15. Now take extra caution when pulling the microphone plug. 16. Finally, seperate the cable from the hinge.