MacPoET
Release 1.2 - October 2, 2000

This folder contains two items:
 ¥ MacPoET - the MacOS PPPoE application
 ¥ Read Me - this file

System Requirements:
 ¥ MacOS computer equipped with a PowerPC CPU.
 ¥ Open Transport 1.1.1 or better.
 ¥ System 7.6 or better.

Configuration Requirements:
Before running the MacPoET Client, please configure your TCP/IP Control Panel
as follows:
(1) Double-click on the TCP/IP Control Panel
(2) Select your Ethernet connection using the Connect via: pop-up menu.
(3) Select "Manually" from the Configure: pop-up menu.
(4) Enter "192.0.0.1" in the IP Address field.
(5) Enter "255.255.255.0" in the Subnet mask: field.
(6) Enter "192.0.0.2" in the Router address: field.
(7) Enter the IP address of your DNS in the Name server addr.: field.
(8) Click the go-away box in the upper-right hand corner and save the configuration.

Additional Considerations:
¥ In order to run MacPoET, AppleTalk protocols must be enabled on your MacOS computer. After installing MacPoET, if AppleTalk is not enabled, an alert box with the following message, "MacPoET INIT: Get autopush ioctl failed", may appear. To enable AppleTalk, select and configure the AppleTalk Control Panel and make sure the AppleTalk Active radio button is selected in the Chooser.