|
|
|
|
L301/311/C301 (silver) |
5 |
|
L302/312/C302 (silver) |
5 |
|
L303/313/C303 (silver) |
5 |
|
L304/314/C304 (silver) |
5 |
|
L305/315/C305 (silver with coax attached) |
4 1/2 |
|
L306/316/C306 (bronze) |
5 1/3 |
|
L307/317/C307 (bronze) |
5 1/3 |
More information on modifying RF Assembly
The RF Assembly has 2 enamel coils and 5 silver coils. Coils L301/311/C301 and L305/315/C305 have taps on the bottom turns. Both taps were originally placed directly across from the solder ends of the coils. Dave replaced both taps 1/8 turn closer to the soldered end of the coil
The coils are very difficult to de-solder, Dave places the assembly on and electric kitchen stove at the lowest heat setting. He does not get it hot enough to melt the solder but uses his solder gun to remove and replace the coils. I use a butane torch.
After removing the turns, pull on the top and bottom of the coils until they are at the original length. When you replace the coils, the bottom should be just touching.
