The gears are locked
| Troubleshooting table | Symptom/conditions: The gears are locked | |||
|
||||
|
Preliminary check
If when starting up the engine the starter motor functions normally, the problem is caused by other systems (engine control, ABS, fuel pumpÖÖ.). Consult the specific charts. If the starter motor does not run continue with the following diagnosis table. |
||||
| DIAGNOSTICS | ||||
|
Test results
|
||||
| Step | Operations | |||
| 0 |
Check oil level
|
All OK
|
Problems found
|
Intervention
|
|---|---|---|---|---|
|
Check oil level as shown in Procedure 2 |
Go to step 1 | Level other than max | Do Procedure 3 | |
| 1 |
Check oil pressure
|
All OK
|
Problems found
|
Intervention
|
| Check oil pressure as shown in Procedure 4. | Go to step 2 | Press < 40 bar | Do Procedure 5 | |
| 2 |
Check ECU errors
|
All OK
|
Problems found
|
Intervention
|
|
Check ECU for absence of errors. Specifically check for:
|
Go to step 4 | Presence of one or more errors included in the list | Go to step 3 | |
| 3 |
Check problems found
|
All OK
|
Problems found
|
Intervention
|
| Check problems according to Procedure 17 | End of procedure | The problem persists | Go to step 4 | |
| 4 |
Regulation of clutch stop pin check
|
All OK
|
Problems found
|
Intervention
|
|
Check the clutch stop pin following Procedure 6 |
Go to step 6 | The stop pin is not regulated correctly | Adjust the clutch stop pin regulation following Procedure 6. Go to step 5 | |
| 5 |
After clutch stop pin adjustment
|
All OK
|
Problems found
|
Intervention
|
| Check that the problem is no longer present. | End of procedure | The problem persists | Go to step 6 | |
| 6 |
The problem persists
|
All OK
|
Problems found
|
Intervention
|
| Contact technical assistance for additional information on the problem | ||||