The car doesn't start
| Troubleshooting table | Symptom/conditions: The car doesn't start | |||
|
||||
|
Preliminary check If, when starting the engine, it is noted that the starter motor functions normally, the problem is caused by other systems (engine control, ABS, fuel pumpÖÖ.). See the specific charts.If the starter motor doesn't start continue following this diagnosis chart |
||||
| DIAGNOSTICS | ||||
|
Test results
|
||||
| Step | Operations | |||
| 00 |
Start enable check
|
All OK
|
Problems found
|
Intervention
|
|---|---|---|---|---|
| With the car running in idle and with Examiner in parameters environment, select start and check that it is allowed. | Starting is allowed. Check the functioning of the starter motor | Starting is not allowed. | Go to step 0 | |
| 0 |
Check oil level
|
All OK
|
Problems found
|
Intervention
|
|
Check oil level as shown in Procedure 2 |
Go to step 1 | Level other than max | Do Procedure 3 | |
| 1 |
Check oil pressure
|
All OK
|
Problems found
|
Intervention
|
| Check oil pressure as shown in Procedure 4. | Go to step 2 | Press < 40 bar | Do Procedure 5 | |
| 2 |
Check ECU errors
|
All OK
|
Problems found
|
Intervention
|
|
Check ECU for absence of errors. Specifically check for:
|
Go to step 4 | Presence of one or more errors included in the list | Go to step 3 | |
| 3 |
Check problems found
|
All OK
|
Problems found
|
Intervention
|
| Check problems according to Procedure 17 | End of procedure | The problem persists | Go to step 4 | |
| 4 |
Check brake pedal switch
|
All OK
|
Problems found
|
Intervention
|
|
Check brake pedal switch operation according to Procedure 7 |
Go to step 6 | The brake pedal does not work correctly | Check the conditions of connections, wiring and switch. Restore/replace broken parts. Go to step 5. | |
| 5 |
After checking brake pedal switch
|
All OK
|
Problems found
|
Intervention
|
| Check that the problem is no longer present. | End of procedure | The problem persists. | Go to step 6 | |
| 6 |
The problem persists
|
All OK
|
Problems found
|
Intervention
|
| Contact technical assistance for additional information on the problem | ||||