The car jerks
| Troubleshooting table | Symptom/conditions: The car jerks | |||
|
||||
|
Preliminary check
If there are other system faults on the vehicle ( instrument panel warning lights on referring to : engine control, ABS, VDCÖ. ) check the cause of these problems. If this is not the case, proceed with this chart. |
||||
| DIAGNOSTICS | ||||
|
Test results
|
||||
| Step | Operations | |||
| 0 |
Check oil level
|
All OK
|
Problems found
|
Intervention
|
|---|---|---|---|---|
|
Check oil level as shown in Procedure 2 |
Go to step 1 | Level other than max | Do Procedure 3 | |
| 1 |
Check oil pressure
|
All OK
|
Problems found
|
Intervention
|
| Check oil pressure as shown in Procedure 4. | Go to step 2 | Press < 40 bar | Do Procedure 5 | |
| 2 |
Verifica errori
|
All OK
|
Problems found
|
Intervention
|
|
Check ECU for absence of errors. Specifically check for:
|
Go to step 4 | Presence of one or more errors included in the list | Go to step 3 | |
| 3 |
Check problems found
|
All OK
|
Problems found
|
Intervention
|
| Check problems according to Procedure 17 | End of procedure | The problem persists | Go to step 4 | |
| 4 |
Bleed the system with Examiner
|
All OK
|
Problems found
|
Intervention
|
|
In active diagnosis run two system bleeding cycles through the "clutch bleeding" command |
Go to step 5 | |||
| 5 |
Clutch parameters calibration with Examiner
|
All OK
|
Problems found
|
Intervention
|
| With examiner in active diagnosis, run the calibration of the clutch parameters through " enable clutch self-calibration ". | Go to step 6 | |||
| 6 |
Road test
|
All OK
|
Problems found
|
Intervention
|
| Check that the fault is no longer present by testing on the road | End of procedure | The problem persists | Go to step 7 | |
| 7 |
The problem persists
|
All OK
|
Problems found
|
Intervention
|
| Check that the problem is not caused by other systems such as the engine, fuel supply ÖÖ.. | Go to step 8 | There are faults on other car systems. | See the specific charts. | |
| 8 |
The problem persists
|
All OK
|
Problems found
|
Intervention
|
| Contact technical assistance for additional information on the problem | ||||