Selespeed oil level
Sele-speed
system oil level must be checked with the car level and the
engine cold.
To check the level, proceed as follows:
• Turn the ignition key to MAR.
• Detach the bleeder pipe and remove the cap, and check
that the level is at the MAX level on the dip stick that is
integral with the cap.
• If the oil is below the MAX level, top up until the
correct level is reached.
• After screwing the cap back on, insert the bleeder pipe
fully onto the cap tip and turn the ignition key to STOP.
Use
only "Tutela CS Speed" oil for topping
up
Hydraulic oil container