PowerMac G4 upgrades
 
Upgrades (so far) for my PowerMac G4 (Quicksilver 2001) 867Mhz. now has 1.5GB RAM, Radeon 9800 Pro Mac Edition (overclocked past PC XT speeds), SATA HD & controller, a new 120mm case fan, and ...
 

   


all upgrades done w/ power off
120mm case fan installed and power on.
mini VRAM heatsinks on the Radeon 9800 Pro
the SATA controller next to the vantec spectrum fan card
a shot of the 120mm case fan (right) and the 80mm case fan (left) w/ power off
80mm case fan w/ power off
the back of the computer (left to right) AGP card, exhaust, USB/FW, fan, SATA
all installed, power on (hard to tell cause the light in the room)
all installed power on, light in the room dim, still not a great angle though
some of the parts before installation
the insides with only the SATA HD and controller installed (& the GeForce...
PCI slots
a shot of the stock processor and heatsink
PCI slots after the upgrades were put in
9800 Pro w/ heatsink and fan removed
GPU with heatsink removed again
powered on before the 80mm LED fan and the 120mm LED fan
shot of the PCI slots w/ power on
shot of the fan on the ATI Silencer
zoomed in a bit
after the 120mm fan was installed and the side panel removed
had to put a cover on the inside of the side panel 'cause the light came thr...