How to connect a Netgear DM602 ADSL Modem


some of this is from memory...
(edited 8th February 2004)

Have now added a page how to do this to my website, find out more here.

How to connect a Netgear DM602 ADSL Modem

This may help

Connect DM602 to phone line via ADSL splitter.

Connect iMac to DM602 by CAT5 ethernet cable.

System Preferences -> Network -> in-built ethernet

Enter an IP address of 192.168.0.2

Subnet Mask should be 255.255.255.0

Enter a Router address of 192.168.0.1

Start Safari

Enter the web address

http://192.168.0.1

You will be asked for the username and password which IIRC (check manual) are admin and public

Wait

You will then have the NETGEAR Gateway

Click Device mode and change from modem to router

Click Basic Router Settings

Enter the following details

Encapsulation PPP over ATM (otherwise known as PPPoA)

Login enter your login name as given by ISP eg username@isp.co.uk

Password enter password as given by ISP

Idle Timeout enter zero (ie 0)

Domain Name Server (DNS) Address

Check Get Automatically From ISP

ISP Parameters for Internet Access

Multiplexing Method VC-BASED

Virtual Circuit   UK

VPI 0
VCI 38

(check with ISP for these if necessary)

Click Apply

Click Test

If you want to use an AEBS with a DM603, configure the AEBS as a Wireless Access Point.

Posted: Sat - January 31, 2004 at 01:02 PM         | |

©