| | Carb as I purchased it on ebay | |
| | | | I took apart the carb and removed the ventruris- they slide out easily | |
|
| | Carb body before boring - measures 26 and 27 mm | |
| | | I took a section of PVC pipe and attached adhesive sandpaper squares to the pipe | |
| | | I used the drill to bore out the carb using 40, 80, 120, 400, and 600 grit paper | |
|
| | After boring the carb diameter was 28 and 30 mm | |
| | | Carb mounted with the float bowl forward | |
| | | A carb adapter from Langdon Stovebolt was filed to allow the proper rotation | |
|
| | Cable throttle linkage modified from a 74 Maverick | |
| | | 14 inch air cleaner modified to drop 1.5 "- only 1/2" taller than tha carb top | |
| | | Air cleaner fastener created with 1/16 x 2 inch aluminum strip | |
|
| | The strip bolts to the base and is tapped for the wing nut stud | |
| | | Carb and air cleaner barely fit beneath the hood | |
| |
