Turbo & BOOST   
---- Lower IAT------
Audi Pressure Tester - VAG 1687 - (davenew) 
AWE instructions for oil lines and turbocharger primed with oil
AWE Pressure Tester instructions
Boost: Having a boost leak would actually cause me to spike 2 high?
Boost: Question about boost on the S4 (Boost and Pressure)
Boost: will increase in poor weather conditions
DP: Prodigy's Downpipe install write-up
DTC: (17964) Charge Pressure Contr. Negative vs. (1796) Charge Pressure Contr. Positive
DTC: Charge pressure negative deviation ?
DV: DV 710N - Where is the tab on DV 710N supposed to be?
DV: Easy to test the DV's. (Flyboy)
DV: How does the majority of the board feel about running DV's upside down?
DV: How the bpv works
DV: Inspecting and rebuilding the Diverter Valve
EBC: Apexi question instalation
EBC: AVCR boost setup
GIAC: APR vs. New Giac vs. AMS on boost ramp up
GT25: AutoSpeed GT25R2 Kit is Complete!
GT25: Autospeed Projekt GT25r initial impressions...(long)
IC: AWE IC vs. Stock IC Logs
IC: SMICs yield 30+WHP!
K04 vs.KO4/RS6 differences?
K04/24: New FATS time : 2.74sec
K04/RS6: 1.65Bar: It's scaling up nicely
K04: With just K04s..more power or no?
K16: Apexi at 1.6Bar with ko4/16s
MAF: Are these MAF housing calculations correct?
MAF: Bad vs good stock A box bosch maf logs
MBC: Am I correct in assuming that if I get a 3-post MBC I can cap one of the side lines
MBC: Apexi AVC-R wiring help
MBC: AVCR Review 
MBC: AVC-R wiring plan, so far (davenew)
MBC: Does SEL do the "exact" same thing as a boost controller?
MBC: install - in parallel w/ N75 #1
MBC: install - in parallel w/ N75 #2
MBC: MBC Only Setup
N249: apparently the N249 vacuum reservoir is also connected to the EVAP system on 01.5+ models
N249: How to Delete the N249
N75: Before you replace the N75, carefully check the hoses leading to and from it for leaks
N75: Explained
N75: GIAC and the N75 have never been good friends... if the N75 is good try turning it c/clockwise
N75: help me figure out if my n75 is going bad...logs inside
N75: is supposed to be adjustable, right?
N75: is this a boost leak or faulty N75?
N75: Manual boost controller/N75 information
N75: Okay tried this N75 for the hell of it.
N75: Thoughts on overboost situation - N75/WG circuit likely cause?
N75: valve (pix only) (davenew)
N75: Valve function explained
N75: What is an N75?
TCD: Installing TCD
Timer: Apexi throttle input wire setup?
Timer: Mark P's turbo timer install (cup holder)
TIP: Turbine inlet pressure testing part II: Real boost
Trubo: Heat shielding the passenger side turbo oil line
Turbo: Break in period for new turbos?
Turbo: Can someone technically explain Zero Clearancing for me?
Turbo: Ceramic coating on hot side of turbo worth it??
Turbo: Description of Options for K04's and K04/RS6's
Turbo: Extrude Hone vs. Port and Polishing, which has more benefits?
Turbo: Hybrids from jacob have to adjust wastegate?
Turbo: Is it bad to drive the car with a bad turbo?
Turbo: i've heard mixed things about clipping the wheels....is anyone familiar with
Turbo: K04 vs K04/RS6 vs Garretts vs hybrids...
Turbo: K04/RS6 vs. OEM K04 vs. K03 ---> Finally planning on going STG 3 (-) - (Part I)
Turbo: Looks like BorgWarner is pushing some cool tech into the upcoming Porsche!
Turbo: RS4K04 vs O.CT K04
Turbo: To the people who have ko4's and for the one's in the GB...what options did you go with and why??
Turbo: Turbine Inlet Pressure (TIP) testing, Part I. (Mike2kS4@PEB)
Turbo: X-post ... Turbo Maps - RS2 - K16 -K24
WG: Any consensus on the number of Wastegate turns/cracking psi for K16's?
WG: Anyone with hybrids from jacob have to adjust wastegate?
WG: Before adjusting your wastegates, make one of these
WG: Boost lag from my k03/16 clipped. what gives?
WG: does jacob buehn have a responsiblity to help pay for wastegate adj. costs?
WG: I'll be installing K04s soon and have been reading up on WG adjustments…
WG: tested the wastgates
WG: wastegate adjusted. logs logs logs
WG: Wastegate Adjustment a smashing sucess!
MBC: PSA: MBC only is not bad at 70-85% throttle all the way to redline *on my car* (YMMV?)
N75: What does the screw in the N75 change?
Turbo: What is the (mechanical) reason for turbos to blow and why are K04s different?
EBC: How to guide for APEXi AVCr
EBC: Electronic boost controller comparison table