High CFM=Low temps

I added 2 92mm fans to the side of the case (split so one blows above the AGP and one below the AGP) and 2 80mm exhaust fans to aid the PSU fan in kicking the warm air out. I also did a duct tape+zip tie setup to attach a 27 CFM YS Tech fan to my OEM heatsink. Max temp= 51C or 123F @ 2.14 volts. The temps go to 133F without the 92mm fans.

All the fans happily mounted. 92 mm fans from the inside. Close up of one of the 80 mm Panaflow exhaust fans (these pups are quiet). Top exhaust fan. I botched the top hole because the pilot drill on my holesaw snapped. I mounted these diagonally so they would be closer together.