Wiring and a Movie! 


I've started on the wiring for the layout. 

I started on the wiring for the layout. I ran a pair of 12 gauge stranded conductors from where I will place most of the Digitrax components out to the hidden return loop. I attached a pair of 22 gauge feeders that were soldered to the rail to a european style terminal strip (cut to length as I need it). I then tapped the track bus using a Scotchlok 567 Insulation Displacement Connector and 14 gauge stranded wire to that terminal block. I installed and wired up a Loys Toys Automatic Reverse Section Controller and tested the whole thing out.

Here's an under the layout photo of some of the wiring


And now for the movie and popcorn. A first run of my N scale trains: (It's small and I need to work on lighting for video)

 

Posted: Mon - May 23, 2005 at 10:18 PM          

©