<Click image to enlarge>
Here is where things get interesting.
1: Turn on your low beams and mark the position onto a stationary object, i.e. a garage wall, to make it easier to align the HIDs when you get them installed.
2: Remove the 4 plastic screws from the grill area
3: Remove the 4 10mm bolts that hold the grill in place
4: Remove the wires from the back of the lights on the grill and remove the grill
5: Remove the three upper screws and one lower screw to remove the light. They are all 10mm bolts. The lower screw is hiding on the underside of the car between the engine and the fender. The bolt is from the fender side through the hole in the image below, and into the light.
<Click image to enlarge>
6: Remove the wiring harness from the lights
Repeat for the other side.
Your car should now look something like this:
<Click
image to enlarge>